Failure Analysis and Scanning Electron Microscopy

Call To Action

Call To Action

Failure Analysis and Scanning Electron Microscopy Services

LEARN MORE

425.335.4400      Email

  • SEM Lab, Inc.
  • Services
    • Failure Analysis
    • Electronic Component Failure Analysis
      • F/A of Capacitors
        • Film Capacitors
      • F/A of Resistors
        • Chip Resistor Corrosion
      • F/A of Inductors
      • F/A of Diodes
      • F/A of Transformers
      • F/A of LEDs
      • F/A of ICs
      • F/A of PWBs
      • F/A of BGAs
      • F/A of PCBAs
      • F/A of Medical Devices
      • Identifying Counterfeit Parts
      • PWB Construction Analysis
    • Materials Analysis
      • Solder Joint Analysis
        • Modeling BGA Solder Joints
        • BGA Assembly Verification
        • EDS Data from Sn-Pb Standards
        • Lead Free Solder Analysis
      • Particle Analysis
      • Fiber Analysis
    • X-Ray Inspection
    • FTIR Analysis
      • FTIR of Plastic Parts
    • Scanning Electron Microscopy
    • Microscopy
    • EDS Analysis
      • Thin Film Thickness Measurements
      • EDS Analysis of Polymers
      • EDS Analysis of Alloy Plating
    • Plating Thickness Measurements
    • Quality Control
      • ENIG Quality Control
  • Examples
    • Devices
    • Materials
    • Cross Sections
    • Miscellaneous
  • Request for Quote
  • Papers
    • Intermetallics in Solder Joints
    • Failure Analysis of BGAs
    • Failure Analysis of LEDs
    • Gold Embrittlement of Solder Joints
    • Failure Analysis of PCBAs
    • Diffusion Barrier Plating in Electronics
    • FTIR Analysis
    • Images of Failures in Microelectronics Packaging
    • Failure Analysis of Aluminum Electrolytic Capacitors
    • Solder Joint Analysis
    • BGA Assembly Verification
    • HASL Finish on PWBs
    • PWB Failure Analysis
    • Solder Flux Residue – Part 1
    • Solder Flux Residue – Part 2
  • Blog
  • Contact Us

EOS Dual Op Amp

Posted on September 29, 2014October 3, 2017 by Ed Hare PhD

EOS Dual Op Amp

Check out SEM Lab, Inc.  to learn more.

Post navigation

← Double-Dumet diode
BGA warpage →

Leave a Reply Cancel Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Recent Posts

  • ENIG Analysis
  • Diode bridge
  • BGA Solder Joint Simulation
  • QFN Failures
  • PWB Quality Problems
  • Al Bond Pad with Ti-W Barrier
  • Thin Film Thickness Measurements
  • EOS fused bond wire
  • EOS Damaged Op Amp
  • BGA Assembly Verification
  • Contamination on MLCC Termination
  • MLCC Knit Line Related Failures
  • CMOS Flip-Flop IC
  • Failure Analysis of PWBs
  • Corrosion Failures
  • Solder Joint Failure Modes
  • Glass Rectifier Diode
  • BGA Pad Cratering
  • BGA Solder Joint Microsection
  • BGA Solder Joint Height
  • Microsections
  • MLCC knit line failure
  • Head-in-pillow defect
  • IR LED Open Circuit
  • Dual Op Amp
  • MELF Resistor
  • SMT Transformer
  • LED Bond Wire Break
  • Chip Components
  • Microcontroller failure
  • QFN Solder Joint Evaluation
  • Connector Contamination
  • Thermal Stress or EOS
  • PWB Short
  • Creep Rupture Failure
  • Mechanical Overstress of Resistor Solder Joints
  • BGA warpage
  • VD on PCB
  • Pb-dendrites
  • Corrosion of Flex Assembly
  • Optical vs SEM imaging
  • FTIR of Unknown Plastic
  • Counterfeit AE Capacitors
  • Nichrome Resistors
  • Yellowed resistors
  • ENIG Discoloration
  • Laminate Damage
  • Wear Out of Aluminum Electrolytic Capacitor
  • Suspected tin whisker
  • Solder Joint Fatigue
  • Failure of IR LED
  • Residue on PCBA
  • MLCC Bending Fracture
  • FPGA ECM short
  • Tin Whiskers
  • LED Lamp Flickers
  • Gold Embrittlement
  • MLCC manufacturing flaw
  • Diode Short
  • ESD Damage in Zener Diode
  • Severe corrosion on PCBA
  • PCBA Corrosion
  • Shorted FET
  • Dendritic Growth – Shorts on PCBA
  • ECM of PWB Battery Contacts
  • Bad Board Design
  • Solder Joint Failure
  • Tombstoning of SMD Inductor
  • Silver Sulfide Crystals
  • IC Bond Pad Corrosion
  • Crystal Frequency Shift
  • Damage in BGA Device
  • Manufacturing flaws in ceramic capacitor
  • Red Phosphorus in IC Molding Compound
  • ENIG corrosion problem
  • FET failure
  • Diode failure
  • Ta-cap breakdown
  • MLCC bending fracture
  • Internal PWB Short
  • Microsection of gold-plated contact
  • Trace fractured on Rigid Flex
  • EOS failure of Power MOSFET
  • Black Pad Syndrome
  • Power Transistor
  • Blue LED
  • Tin Whiskers
  • Bad diodes
  • EDS shows Teflon Contamination
  • Tin whisker
  • Residue under BGA
  • Fuses on Video RAM
  • Solid-State Relay
  • Knit Line Fracture and Porosity
  • ESD damaged diode
  • Silver Sulfide Growth
  • MLCC short
  • Fused bond wire
  • Skip plating
  • Resin Starvation
  • Quad NOR ICs
  • LED Failure
  • Electromigration short
  • Stranded wire failure
  • Corroded PTH-via
  • Tin-lead whisker
  • SAC solder joint
  • SMD diode short
  • Excess solder gull-lead joint
  • Decapsulated diode
  • BGA die crack
  • EOS on GaAlP LED
  • BGA warpage
  • EOS Dual Op Amp
  • Double-Dumet diode
  • Corroded inductor windings
  • EOS damage on VDD
  • EOS fused bond wire
  • Marking on transistor die
  • Welded relay contact
  • Inner Layer Separation
  • Bond cratering microsection
  • MLCC dielectric porosity
  • Diode EOS
  • MLCC flaws
  • Parylene coating
  • Diode EOS
  • BGA gas voids
  • Distorted BGA
  • PLCC bond fail
  • Conductive residue
  • PTH barrel crack
  • Missing BGA ball
  • LED die fracture
  • Fractured solder joint
  • Electromigration short
  • MLCC firing cracks
  • Ta-cap failure
  • Over crimped
  • Suspect wedge bond
  • BGA ball fail
  • Bad HASL
  • LED bond failure
  • LED failure
  • Resistor network solder joint fracture
  • PTH via barrel crack
  • EOS failure
  • ENIG problem
  • Black pad syndrome
  • Poorly drilled hole
  • IC voltage transient
  • Wire bond
  • Bond cratering
  • Chip resistor fracture
  • Via corrosion
  • MLCC knit line failure
  • SOT23 diode
  • Chip resistor corrosion
  • BGA Solder Mask Defined Pads
  • PTH Pad Lift
  • LED microsection
  • MLCC flex fracture

Recent Comments

  • Ed Hare PhD on Diode Short
  • Leo Ranta on Diode Short
  • Ed Hare PhD on Report 3015 Download
  • Vicente Zamora on Report 3015 Download
  • Mike Rohlik on PWB Quality Problems

Categories

  • Uncategorized

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Contact Info

© 2023 SEM Lab Inc. | Privacy Statement | 425-335-4400 | info@semlab.com