Silver Sulfide Crystals

Silver is a common material used to connect resistor terminals to the resistive element within the resistor. This example shows some unknown crystals growing out of the termination area.

Silver corrosion

These crystals are shown in the BSE SEM image below.

2000A_1_displayed

EDS analysis showed that these are silver sulfide crystals.

2000A_2_displayed

These crystals most likely formed as a result of gaseous sulfur corrosion of the silver thick film conductor near the termination of the resistors. Corrosion such as the type seen here is typically due to atmospheric sources of sulfur such as diesel fuel fumes or out-gassing from cardboard.

Check out SEM Lab, Inc.  to learn more.

Leave a Reply

Your email address will not be published. Required fields are marked *